Do Electric Burners Wear Out?(Guide)

Do Electric Burners Wear Out?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Do Electric Burners Wear Out?

Electric burners are stovetops that use electric coils to heat pans. And while I am discussing stovetops, you can also make your own with a homemade metal dish and an ordinary household fan.

It’s probably worth investing in a metal dish if you’re making sauce or soup, as these can burn quickly without one.

Yes. Electric burners have a lifespan, and they wear out over time – they become slow to turn on and slow to heat. You might as well buy a new one because the switch probably burned out too. For example a 6 amp element should last a little over four years, while a 12 amp element should last almost ten years.

Luckily, electric burners are cheap, so you don’t have to spend a lot of money on something that costs more than the average person makes in a year.

Many Factors Can Cause An Electric Burner To Wear Out, Such As:

You find the element burned out. If this applies, you can replace it, but if not, the burner comes with a spare.

Once you replace the element, turn the burner on, and it will work again, but hot spots or cold spots outside of the center will probably show up because of incorrect electrodes installed after previous repairs.

The heating element is OK, but overuse has blown out the ceramic fuse.

Many electric burners(Amazon Link) come with a ceramic fuse to protect your house or water heater from being over-heated, and you often can’t replace them with an exact replacement.

If this applies, you can replace just the fuse or replace the burner, or both.

The heating element has gone bad, and the ceramic fuse has blown out because of high heat use.

Most electric burner elements have many hours rate-of-use before over-use causes them to burn up.

If you wonder how long an element will last, use is yearly rated. The higher the amp rating, the longer it will last.

For example, a 6 amp element should last a little over four years, while a 12 amp element should last almost ten years.

As long as you don’t turn your electric burner on “high” all the time, it probably won’t burn out. Also, you can replace the element regardless of the answer to the previous question.

The heating element has gone bad, and you have both a ceramic fuse and a new element. Now you have to decide whether to change the fuse or the element.

If it is a 12 amp burner and you find the element has burned out, it is probably fine, but until you know, don’t use it at all.

If the fuse blows out and you know it is bad, replace it with a new one of the same rating.

The ceramic fuse has blown out again. You can’t be sure that it is bad unless you test or replace it, so if you don’t want to spend the money to test or replace it, don’t use the burner at all.

If you have been using an electric burner for a long time, there is a pretty good chance that someday your element will fail. – If this happens, buy a new one.

Why Do Electric Stove Burners Stop Working?

Electric stove burners stop working because the thermostat in the stove is off. The thermostat regulates the heat and turns it off when it gets too hot; otherwise, it would burn out.

The electricity is still running to the stove, and you can easily verify this by first turning on all the electric ovens in your kitchen then checking that all the electric oven doors are open.

The top burners will burn out before the ovens do, but they should still work when you turn off the ovens. If the burners work after turning them off, you know the problem lies in your electric stove.

The thermostat can be manually reset on most stoves.

Unplug it from the outlet, turn it on and allow it to heat to its average temperature (usually something between 200-300 degrees).

Then pull back on the lever until your finger can go all the way across the front of it (this will open up a gap between two parts of the thermostat).

Thus, use scissors to cut a piece of electrical tape and tape over the two tiny holes in the thermostat’s front. This will make it easier for you to push the handle and turn it back on.

If you do this, you will most likely fix your problem.

What Is An Infinite Switch On An Electric Stove?

You can find an infinite switch on an electric stove on many small cooking appliances.

It is typically a metal lever that controls either the “Off” or “On” position, but with some models, some parts of it may also control a fan, an oven light, or even an oven timer.

You can find infinite switches on toaster ovens(Amazon Link) and deep fryers to rice cookers and food processors.

There Are Two Common Types Of Infinite Switches: Push-Button And Slide-Click

One can easily recognize push-button infinite switches because they use a single button (most times) or a large button (like on the stove) to turn the heat source “On” or “Off.”

These are by far the most common type of infinite switches.

On the contrary, Slide-click has a single sliding part that controls either the heat source, then a timer;

Or if combined with other switches, it can control anything from cooling fan and timer to even an oven light and oven door.

You can typically find infinite switches on electric stoves and ovens, but you can also find them on a range of electric food appliances like rice cookers and toaster ovens.

People often use them in industrial deep fryers, air fryers, and more.

Electric stoves usually have infinite switches because they use electric heat instead of natural gas or propane (hence the name).

Electric stoves use an electric heating element to heat the food in the oven or on the stovetop, just as gas-powered stoves do.

Electric ovens also have infinite switches because they are not gas-powered and instead use a solid-state control system.

The control system typically comes with a solid-state relay that electronically controls the power going to the electric heating element for each temperature setting of your oven.

Usually with one or two turn knobs for temperature (these are usually called “tare” knobs).

If you set the tare knob to zero, the power cuts off completely, and no heating completes.

Turn the tare knob to a value above zero, like one-half, and the oven heats just enough to take up as much space in your oven in that specific temperature setting.

Turn the tare knob further, and it will turn on the heat at a higher level.

Infinite switches are also in constant-heat electric stoves for different reasons than simple ones. For example, they create a “bake” feature on electric stoves with no-bake elements.

How Do You Check The Burners On A Glass-Top Stove?

You can locate the burners on your stove underneath the glass surface. To access them, you should first remove the grates from the range.

Locate the knobs that surround each burner. You should feel slight resistance when you turn these knobs.

If you feel little to no resistance, the burners may be inoperable and need attention from a professional.

Do Electric Burners Wear Out?

Turn each knob in an anti-clockwise direction until it reaches the point where it no longer resists your turning force, then turns it back clockwise for two clicks.

Check the burners underneath the glass by pressing down with a paper towel or hand towel on each burner. The burner should ignite and stay lit.

If you hear a hissing sound, the flame is too high. To adjust the flame lower, turn the knob for that specific burner back another two clicks, then let it sit for about five minutes before testing again.

Wait about five minutes after turning up a knob for it to light entirely before trying to adjust it again.

Sometimes you’ll hear a popping sound when you turn a heater knob. This is perfectly normal.

Each pop may cause the flame to flicker a bit, but this means nothing is wrong with your stove.

Your heater’s sensors will get confused during this time and are resetting themselves automatically.

If you ever smell gas, immediately leave the room and turn off your stove from a distance by using the manual pull-type switch located beneath your oven.

Can A Hot Pan Lid Break A Glass Stovetop?

Yes. A hot skillet can break a glass stovetop.

While it isn’t usually the first reaction, a hot pan can shatter the tempered glass top if exposed to the intense heat from high-temperature cooking like bacon or browning meat in a frying pan.

One needs to take pans and lids off of the stove when they are not in use so that they don’t scorch and scratch up your stove’s tempered glass surface.

But, most people in the house do not know that this is a real danger. It seems like an unlikely risk.

The first step to preventing such an event is to never put cold food on a hot glass stovetop or hot pan.

The second step is not to leave lids or pans unattended on the stovetop, which people have identified the most common cause of damage to glass stovetops by hot lids or pans (33% of all incidents).

The third step is to make sure that your stove is well-ventilated, which prevents the glass from heating too fast and causing it to break.

Many people who suffer from a broken glass stovetop blame themselves for not properly using their stove or pans.

People may also blame other causes, such as a lack of ventilation. Many damage cases generally result from the incorrect use of the appliance or improper care.

Can One Use Windex On The Glass Top Stove?

No! As enticing as it might get, you should never use household cleaning products on the glass top stove.

These chemicals are hard and can cause damage to both the cooktop and your body.

Also, using Windex or similar cleaners can cause severe stress on the surface of the glass, which will probably result in cracks and breaks.

This is because of the caustic nature of these products. Heating elements up close to an open flame could lead to something potentially dangerous, like a fire or explosion.

Thus, you should never use Windex on a glass-top stove.

Why Shouldn’t I Use Windex On The Glass Stove?

You shouldn’t use Windex because these chemicals are solvents and abrasives. A solvent is a substance that will dissolve substances and dissolve them into a liquid solution.

As an example, water is a solvent. Thus, if a substance has dissolved into water, it will become weak and non-harmful to most organisms. However, this is not always the case.

The second definition is anything that will dissolve something else into its substance to become a solution. For example, Windex is an acidic cleaning agent that acts as a solvent.

This means that it will dissolve other substances it comes into contact with, not only water.

The problem with using Windex on glass-ceramic cooktops is that the cleaner’s components will eventually wash off into a solution and onto the cooktop surface.

These components include ammonia and ethanol.

Ammonia and ethanol are both strong bases, defined as alkaline chemicals with a pH of 11. It is high in its acidic range.

This means that when Windex comes into contact with the cooktop surface, these components will dissolve other chemicals from the cleaner, such as acids and non-polar molecules.

The result will be a fluid mixture of acids, alcohols, and amines that are very difficult to remove.

The result of this is that when the Windex solution dries on the cooktop, it will leave behind a very caustic group of chemicals that can cause hours and even days of pain and damage.

It could lead to burns in the long run because of the caustic nature and strong bases determined in this mixture.

Can I Put A Hot Baking Sheet On A Glass Top Stove?

Yes. Glass top stoves operate on any cookware as long as it’s using the correct burner temperature.

Materials with a low melting point, such as Teflon, you shouldn’t use on glass top stoves.

You should ring out non-stick pans before using them to prevent the food from sticking and becoming unappetizing.

And it’s also a standard recommendation that you use low heat settings when cooking in these types of pans.

If you’re unsure of what to use, a pan with a non-stick coating will work better than traditional cast iron.

The heat emitted by your stove is not as great as the stovetop of a gas or electric oven, but it suffices to cook anything you want.

Glass top stoves require a change period, though, so it’s best to read through the stove’s instructions when you first buy it.


Electric burners’ design was for use with flat-bottomed cookware, especially those made from glass.

The glass top stove is easy to operate, and you can use a variety of supplies to prepare food.

Even though the flat burner surface comprises tempered glass, it can still crack if you don’t take care of it as expected.

A cracked stovetop will be very difficult to clean and maintain, and it may also not function as expected, depending on its severity.


Hi! I' am Tom. I was a manager in one of the biggest stores for over 10 Years, am also an SEO by night. I don't like to call myself a blogger; they are very analytical, do email marketing, and know all SEO stuff. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts