Why Does My Element Light Stay On?(Guide)

Why Does My Element Light Stay On?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Why Does My Element Light Stay On?

Your rice cooker element light stays on because it’s on the ‘keep warm’ setting. When rice cooks, it generates significant heat, keeping it warm indefinitely. This means that there is still power going to the element even when it may appear as if there is no power and that you’re not looking at the right part of your appliance.

This can be quite disconcerting to see the light lit up on your rice cooker, but it is perfectly normal.

When you use the settings on your rice cooker properly, you won’t have to worry about anything other than remembering to set the timer. This is the same regardless of the model.

If you’re having trouble, consult your rice cooker manual for any troubleshooting information which may be available or contact the manufacturer for extra support.

If the ‘keep warm’ light is on, but you aren’t cooking rice, then it’s likely you forgot to turn it off after the cooking process was complete.

This can be common if you use your machine often, as it isn’t hard to forget that you’ve left it on.

If you’re experiencing an issue that you can’t resolve, call customer service for your rice cooker manufacturer.

If you don’t have the information available, then check the model number of your appliance and enter it into the search bar on their website or attempt a Google search to find your model number along with a troubleshooting guide.

Why Is My Cooktop Light Staying On?

A cooktop is a heated surface found in cooktops or stovetops. A cooktop typically comprises a thin metal layer, with the heating elements near the top.

The surfaces are frequently in direct contact with water that flows like molten steel, giving them their characteristic appearance.

Special designations for cooktops include electric range and electric oven ranges.

Your cooktop light stays on because the power source is still plugged in, even after a timer shuts it off.

Mostly, you don’t need to do anything. However, there are rare instances where the cooktop light will stay on even when the timer has shut it off.

So, if this happens to you, you’ll want to know what solution is available and how much time has passed since your cooktop shuts itself off.

The first step is to check the day view display of your oven. This will tell you how much time has passed since the cooktop(Amazon Link) shut off.

The day view display shows the time in hours and minutes. For example, if your cooktop light stays on for two hours before you notice it, then check the day view display to see if that amount of time has elapsed.

If the day view display is blank, the cooktop shut off during the night or when you weren’t using it. Then you’ll want to do something.

It’s best to check your appliance manual and learn any special instructions for your specific make and model.

For example, if your cooktop’s power source fails and needs to be reset, your manual may tell you how to do that.

How Do I Reset My Cooktop?

Your cooktop element on light stays on because the control board is no longer shutting off that circuit.

This happens when a malfunctioning circuit connection or the cooktop terminal where the wire connects has come loose.

If you have changed your cooktop, such as moving one knob around, that may be what’s causing it.

Each control board terminal corresponds to a specific knob, and two knobs switch the elements on or off.

You should find your terminal connection on the element and test it with an ohmmeter to see if it broke. If it broke, replace it (which you can do yourself).

It could also be that there is simply a loose wire somewhere in your cooktop wiring.

If you test the broken wire each time in your kitchen and do not get any sparks, it is probably safe to ignore that circuit.

You should double-check the rest of your wiring and if you find other problems there, replace them.

Why Does My GE Induction Cooktop Keep Turning Off?

Your GE induction cooktop keeps turning off because the induction cooktop is sensing a problem that needs resolving.

This error can be because of objects too large for the cooktop, such as pots and pans or cooking utensils, or by wires too close to or touching one burner.

Problems like these need immediate attention because your appliance could risk a major malfunction without them.

Another cause of this error could be the cooktop has not leveled. When the induction cooktop has not properly leveled, it does not sit evenly on your counter.

The uneven surface can cause a problem with the induction coils, and the error code “Keep turning off” displays.

If so, first, level your cooktop by sliding one of the front feet up or down. After leveling your appliance, try starting it again.

If it works as expected, you do not need further action. You can also check for level using a level or repeatedly turn the cooktop on and off.

If the error code keeps appearing, your cooktop has not leveled correctly, and you should follow the troubleshooting steps below.

If none of these fit your situation and there are no obvious problems with your cooktop, but it keeps turning off, there might be another reason for this error.

A dirty or delicate cooktop could cause this error. If that’s the case, follow the troubleshooting steps below to get your GE induction cooktop working again.

How To Unlock And Fix A Failed Induction Cooktop

  1. Unplug the unit and wait at least 15 minutes before starting it again. Clean the surface of all residual food particles of hair buds with an alcohol-based cleaner (such as isopropyl alcohol)
  2. If your cooktop still does not work correctly, use a flathead screwdriver to remove the drawer and take out the control board.

Clean its surface with a dry cloth. The control board is usually at the rear of the appliance.

  1. Ensure to touch only the designated areas of the control board that have the label ―AC‖ and DC‖ (showing alternating current and direct current)
  2. Insert the control board back into your unit and replace the drawer and then plug your cooktop and wait at least 15 minutes before trying to start it again
  3. If your GE induction cooktop still does not work as expected, use a flathead screwdriver to remove the drawer and take out the control board.

Clean its surface with a dry cloth. The control board is usually at the rear of the appliance.

Ensure you touch only the designated areas of the control board that have the label ―AC‖ and ―DC‖ (showing alternating current and direct current)

  1. Insert the control board back into your unit and replace the drawer. If your GE induction cooktop still does not work correctly, it might need further servicing.

Don’t hesitate to contact your nearest service center for help. The service center will help you troubleshoot the problem and resolve errors with your appliance.

Why Does My Electric Hob Keep Turning On And Off?

Your cooktop electric hob keeps turning on and off because it cannot detect a magnet.

This is because of a faulty magnetic sensor within the hob itself, meaning that the hob will not recognize that it should be on to cook.

If the hob is not switched on, the ‘off’ position should light up a small red light on the front of the hob as below. The red light should also appear if:

  1. The hob has only been off for a short time, e.g., three seconds or less, and then tried to work again.
  2. The hob was in an ‘on’ position for longer.

If the hob is on but not working, leave it off for a minute or so, then try turning it on again.

If this doesn’t solve your problem, contact Technical cover in your country to seek their help.

Why Is My Electric Stovetop Smoking?

Your electric stovetop is smoking because there is a problem with the wiring. An electric stovetop often smokes when your electrical circuit is faulty or if you have a loose wire.

If it’s smoking because of these issues, you must fix this before anything else happens, and anyone’s safety could be in danger.

You need to check for a loose wire and disconnect it from the circuit to fix this issue. You can do this by using a wire tester.

The easy ones are available in most hardware stores, and you can order online if they don’t have one.

After disconnecting the faulty wire, you must seal it with caulk and reconnect it to the circuit.

Once you have fixed the problem, you need to ensure that all of your connections are tight and that there aren’t any loose wires or parts that could cause problems when your stove is running.

Also, suppose the problem is inside the toaster.

In that case, it’s a good idea to have your stovetop tested by a professional to make sure that nothing is faulty inside and that there are no issues with the electric components.

When Should I Replace The Electric Stove Burners?

You should replace your electric stove burners if you notice the glass cracked or came loose, the burners rusted, and it isn’t sparking anymore when you turn on the gas.

You should also replace them if the burner is too hot or if you notice the flame has a foul odor.

If, by some miracle, your stove burners are still in good shape, but you’ve noticed them getting harder to use and lighter to turn on, it might be time to swap out your burners with new ones.

But in any case, I recommend replacing them as soon as you notice any problems.

How Do You Stop A Stovetop From Smoking?

You can stop a stove from smoking by turning it off and pouring a pot of cold water on the stovetop.

You can also use a pot lid to cover the area directly over the burners and cover the burner knobs with aluminum foil.

In certain cases where it’s necessary to turn off power to a stovetop, you’ll want to shut off the power before pouring on cold water and waiting for your unit to cool down completely before turning it back on.

A stovetop smoke because the metal coils on the tops of your burners are hot and are cooking with natural oils within the metal.

The smoke comes from the mixture of those oils and heat.

This happens because you cook on the stove more often than necessary, and those natural oils get hotter, stick to the surface, and burn instead of cooking your food.

To help avoid this, you can wipe down your stovetop daily with rubbing alcohol or vinegar to clean any residue that might be present after cooking.

This will also help prevent buildup, and over time, if you use a lot of oil, your stovetop will stop smoking.

Another inexpensive option is to buy a stainless-steel stove top protector. These protectors comprise stainless steel with a layer of rubber on the bottom to prevent scratching the surface.

Sometimes they’re also sold as cold plate covers. These cover the burners and insulate the top to help prevent foods from burning and oils from smoking.

How Do You Repair A Burner On A Flat-Top Stove?

You can fix a burner on a flat-top stove by turning off the power to the burner. Depending on your type of stove, you can do this by unplugging the stove or turning off a circuit breaker.

Next, wipe down any remaining food or debris with a damp cloth and use petroleum jelly (or another heat-resistant grease) to coat the burner.

You may need to scrub and scour for this part of the job. If you still have a problem with the burner after you’ve cleaned it, try using a steel-wool pad to clean it up.

Clean the burner base and let everything dry before turning the power back on.

If this doesn’t fix the problem, or if the burner cracked or broke, you may need to replace it. Go through each step until your stove works again.


Cooktops and stoves have changed a lot over time. Nowadays, you can find them in many styles.

You know what type of cooktop is best for you, but above all, remember always to maintain your stove or cooktop’s proper care and maintenance.


Hi! I' am Tom. I was a manager in one of the biggest stores for over 10 Years, am also an SEO by night. I don't like to call myself a blogger; they are very analytical, do email marketing, and know all SEO stuff. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts