Why Is My Pit Boss Keeps Tripping Breaker(Guide)


Pit Boss Keeps Tripping Breaker

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Why Is My Pit Boss Keeps Tripping Breaker

Tripping Breaker is a kitchen safety device that prevents electric shock.

It will trip the breaker if it detects an overcurrent, Undervoltage, or ground fault in your home’s electrical system.

The Tripping Breaker can boast installment within minutes by anyone with basic household tools and knowledge of electricity.

The benefits to installing a Tripping Breaker are:

  • Peace of mind knowing you and your family members boast protection from electrical hazards
  • Saves money on costly repairs such as replacing appliances
  • Keeps food fresh since power doesn’t go out during brownouts
  • Protects against lightning strikes for those living in high-risk areas and peace of mind when you’re away from home.

Your Pitt Boss keeps tripping the breaker because they are connected with too many devices plugged in one circuit at once, which causes a problem. This causes unnecessary stress on the wiring system, resulting in serious damage.

A tripping breaker will cause all power to your house outlets to be lost.

Can You Plug A Pitboss Into An Extension Cord?

It depends on the type of extension cord. If you have a regular household extension cord with three prongs, the answer would be no.

These cords are not designed for use with high-wattage appliances such as a Pitboss.

But, if you have one of 10-foot heavy-duty outdoor power cables with four prongs and boasts a rating for up to 15 amps (3000 watts), the answer would be yes.

Heavy-duty power cables get constructed with a three-wire system which includes ground (the green or bare wire).

The third wire provides electromagnetic shielding and is also grounded, hence the grounding plug on the end of the cable.

If you use the cord with your Pitboss, you will need to make sure that it boasts plugging into a GFCI outlet.

Like any other electrical appliance plugs into an extension cord or surge strip, if there is a power outage or tripped GFCI switch while cooking.

The Pitboss may turn off instead of continuing to run. The heavy-duty power cables come in 10ft lengths only.

I recommend using them for stationary outdoor appliances such as freezers or refrigerators or powering holiday lights.

If you are unsure if your extension cord has ratings for the wattage of your appliance, please consult a licensed electrician.

Does The Pit Boss Have A Fuse?

Yes! Pit Boss boasts a fuse of 5 amp, meaning that it can take quite a bit of power to trip.

This is vital for people who like to cook large meals, as the Pit Boss can handle up to an 80-pound turkey without any problem.

Besides, the fuse is also backed by a one-year warranty, ensuring that you’ll be able to get a replacement should you ever need one.

For those curious about what happens to the Pit Boss once its fuse blows, the answer is simple: it shuts down.

This means that your cooker will not get any hotter and that there’s no risk of a fire should something go wrong. In other words, it takes care of safety for you by monitoring itself.

Does Pit Boss Use A Lot Of Electricity?

No! Pit Boss uses 300-500 watts compared to 1200-1800 watts for small ovens.

Pit Boss is equivalent to a 13″ oven with six burners, equal in electrical usage to a standard kitchen stove.

The electric range cooker’s idea of cooking eight racks of ribs at once over 12 hot burners in 20 minutes using 15 amps sounds like an impressive marketing tactic.

Pit Boss Keeps Tripping Breaker

But if it were truly attainable, then these units would be popping up in restaurants everywhere.

There are a few factors that affect a smoker’s electrical usage. The first is the size of the smoker. Larger smokers need more electricity to operate than smaller smokers.

The second factor is the type of smoker. Electric smokers use more electricity than charcoal smokers.

And finally, the temperature at which you smoke meats makes a difference. The higher the temperature, the more power the smoker will use.

So, what can you do to reduce your Pit Boss smoker’s energy consumption? First, try smoking at lower temperatures whenever possible.

Second, make sure your smoker is properly insulated. Third, use an energy-efficient electric smoker like the Pit Boss DELUXE.

This smoker has a smart controller that adjusts its power usage according to the temperature you see.

So you can smoke meats at low temperatures without using a lot of electricity.

GFCI Problems

GFCI has various problems with it. One is nuisance tripping. This means that the GFCI keeps shutting off for no good reason.

It can be not very pleasant when you’re trying to take a shower, and the GFCI keeps shutting off the water.

Another problem with GFCI is that it can sometimes not trip when there’s a problem.

This can be dangerous because you might not know that there’s something wrong with the electrical system until it’s too late.

GFCI also tends to trip even when there’s nothing wrong. This can frustrate you when in the middle of using something that requires electricity and the GFCI trips.

Overall, GFCI has a lot of problems, and it’s not always reliable. If you can, try to avoid using GFCI whenever possible. Otherwise, you might run into some problems.

My Austin XL Keeps Tripping My GFCI

If your GFCI outlet constantly trips, it might be because of something in your kitchen. GFCIs boast designs to protect you from electrical shock.

But if there’s something in your kitchen that’s causing them to trip, they can’t do their job.

Here are a few things to check for:

  1. Are you using electric appliances near the sink? If so, move them away so they’re not running right next to the water.
  2. Is your dishwasher leaking water onto the ground? If so, fix the leak and ensure the dishwasher is draining properly.
  3. Are you using any high-powered appliances like blenders or mixers? Try plugging those appliances into a different outlet.

If you’ve checked all these things and your GFCI outlet is still dripping, it might be time to call a professional.

Electrical issues can be dangerous, so it’s best to leave them to the experts.

Pit Boss Pellet Grill Troubleshooting – Guide

Pellet grills are very popular with backyard chefs. They offer the best of both worlds- an easy-to-use gas grill and a convection oven.

But, like any other piece of equipment, they need some maintenance to keep them running at peak performance.

Pit Boss Keeps Tripping Breaker

Here is our guide for troubleshooting pellet grill problems you may encounter and avoiding these issues in the future.

1) The unit is not heating up: This could get caused by several factors. But most often, it’s because your pellets aren’t feeding into the firepot properly (not enough).

To fix this, remove all the pellets from the hopper, then hold down one side of your feeder’s lever until it clicks open (this should release more pellets into the firepot).

Please give it a couple of minutes. If the unit is not heating up sufficiently after giving this method about 5 minutes, you can repeat it.

Unplug your machine and inspect the auger if it still doesn’t work. It looks like it’s spinning freely with no resistance from pellets or calcified ash.

You can take apart your fire pot and clean out the burner area and the drill pretty easily.

Inspecting your pit’s burner tube: To see whether your tube needs cleaning. First, shut off all your pit’s burners and remove them from their mounts.

Then cover any openings in the grill or other holes that might have airflow going into them with a towel so you don’t lose your heat.

Next, please take off the cooking grates and remove the fire pot (with the drill removed), then tip it over and look inside for any clogs in or around the tube.

2) The unit is heating up too quickly: This is usually caused by too many pellets in the firepot– once you get to a certain point.

They start burning more rapidly than before. To fix this problem, open your pit’s feeder all the ways and set it on high again.

Make sure that enough pellets feed into your machine to account for how many you added from.

Step 1- if not, add more pellets one at a time until you have reached an optimal level of performance again.

3) The grill isn’t cooking evenly: This is usually caused by hot spots on the grate. To fix this, remove the cooking grates and turn them over.

Then, using a Weber chimney starter, light about 60 charcoal briquettes and let them sit for about 30 minutes until they are all covered in white ash.

After that, evenly distribute the coals around the cooking grates and replace them. You can also adjust your machine’s airflow to achieve a more even heat distribution.

4) The drill isn’t spinning: This is usually caused by pellets getting stuck in the drill, which will block it from turning.

Take your fire pot and clear any blockages to free up the drill.

5) Your grill is smoking too much. This is usually caused by the grease dripping from the cooking grates and hitting the heat deflector, which then causes a large flame.

To fix this, remove the cooking grates, turn off your machine, let it cool down for about 15 minutes, then wipe the grease off of the heat deflector with a paper towel.

Ensure that you don’t put the cooking grates back on until the grill has completely cooled down.

6) The igniter isn’t working: This is usually by either a defective part or bad wiring.

To fix this, first, inspect the wiring by disconnecting it from the machine and checking for any breaks or other damage.

If it all looks good, try replacing the igniter by removing the screws that hold it in place. Then reconnect the wiring and test it out by hitting the “ignite” button.

7) You’re getting a lot of sparks: This is usually caused by either build-up on your cooking grates or an air leak in your machine.

To clean off your cooking grates, use a wire brush while they’re still hot to remove any dried-on food or grease.

You can also try using a piece of aluminum foil to line your grill’s cooking grate (or one side if you’re only having trouble with one side).

If you’re still getting sparks, check for any leaks in your machine by spraying soapy water around all the connections and seals.

Seal it up with some high-temperature silicone caulk if you find a leak.

8) You’re running out of pellets: This is usually caused by the auger not feeding enough pellets into the firepot.

To fix this, open your pit’s feeder all the ways and set it on high again.

Make sure that enough pellets are feeding into your machine to account for how many you added from step 1.

If not, add more pellets one at a time until you have reached an optimal level of performance again.

9) The grill takes too long to preheat: This is usually caused by a lack of oxygen getting to the firepot.

To fix this, open your machine’s air intake all the ways and increase the fan speed. You can also try using a chimney starter to light your pellets before adding them to the machine.

10) The temperature is inaccurate: This is usually caused by a defective part or bad wiring.

To fix this, first, inspect the wiring by disconnecting it from the machine and checking for any breaks or other damage.

If it looks good, try replacing the temperature probe by removing the screws that hold it in place.

Then reconnect the wiring and test it out by setting your grill to different temperatures.

Conclusion

The Pit Boss Pellet Grill Troubleshooting Guide will walk you through the most common problems that can occur with your grill.

If these solutions don’t work, it might be time to call in a technician for a more thorough inspection of the circuit breaker and power supply wiring at your home or business.

Fostering team collaboration is important when troubleshooting any issue on an electrical system as there are many components involved, which all need to function together.

It’s also very helpful if one person has experience dealing with GFCI circuits.

They often fail due to water damage from leaking pipes or other sources, especially if you live near saltwater.

Tom

Hi! I' am Tom. I was a manager in one of the biggest stores for over 10 Years, am also an SEO by night. I don't like to call myself a blogger; they are very analytical, do email marketing, and know all SEO stuff. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts